Phenolic moulding

Type: EA-5541

ISO 14526-3: (WD30+MD20),X,E~(WD40+MD10),X,E

Colour: Black

1.Characteristic and usage

This product is general purpose phenolic moulding materials. Based on Novolac with wood flour and other mineral additives, it is suitable for compression process with good performance. It gained the UL94 label. It is mainly used to make insulation structural parts of low voltage electrical equipment as well as daily utensil parts, etc. The product is in granular form and colored products are available as per customer’s needs.

2.Technological property (See following table)blob.png

Notes: 1,The indexes of fluidity (Raschig) and shrinkage are determined by the seller and buyer, they are only for reference. 2, Test specimens for determination are compression molded. 3, Data in the table are determined according to ISO 14526-2 ,Test of flammabilty is determined according to UL94 .

3.Moulding condition for compression(for reference)blob.png

Notes: After moulding compound is preheated, must join the mould 2-10 seconds then exhaust air in mould to add again to press.

4.Package and storage

The products should be packed in moisture-proof liner bags to keep dry; the net weight of product is 25kg. On the bag, the type, batch number, weight and manufacture date of product should be marked.

The products should be prevented from moisture and heat. They should be stored in cool and dry warehouse. They should be kept away form fire, warm air and sunlight. The product storage life is one year. If the products are out of the storage limit, the another tests should be done, and then the qualified products still can be used.